Old Fashioned Elevator Push Button Switches , Size 47x39.5x23.5mm (SN-PB117)
Elevator Push Button.pdf
Elevator Buttons, Elevator Parts
Description:
1. Surface with stainless steel filled with transparent resin.
2. Installed by cassette structure, suitable for 2-6mm panel.
3. Signal type: 'digits', 'up', 'down', 'close', 'open', 'alarm', 'intercom' and so on.
4. Color optional.
| Size: | 47x39.5x23.5mm |
| Material: | Plastic frame;stainless plate;tact switches;front embedded;the reverse side will be inserted into slot |
| Available Color: | Red,blue,orange,green and white |
How do elevator buttons work?
The buttons in the elevator car and the buttons on each floor are all wired to the computer. When you press one of these buttons, the computer logs this request. ... The computer varies the motor speed so that the car slows down gradually as it reaches each floor. This keeps the ride smooth for the passengers.
FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.
Product Tags:
|
|
Old Fashioned Elevator Push Button Switch With Size 47x39.5x23.5mm Images
|
